Unable to limit bandwidth (squid 4.7.2 )

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Unable to limit bandwidth (squid 4.7.2 )

neok
Hello everyone!
I have a 100/100 Mbit/s internet link and I am trying unsuccessfully to limit downloads to a maximum of 15Mb/s of any IP on my network. Some downloads consume the entire link.
I copy my settings to help me see where I'm going wrong. Thank you very much!
Gabriel

PS.: squid -v '--enable-delay-pools'

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN)
acl localnet src 10.10.8.0/22 # (My LAN)
#acl largefiledown src 10.10.8.0/22 # Limitar bajada y subida a 10Mbps
#acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN)
#acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN)
#acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines
#acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN)
#acl localnet src 192.168.0.0/16 # RFC 1918 local private network (LAN)
#acl localnet src fc00::/7       # RFC 4193 local private network range
#acl localnet src fe80::/10       # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT

acl LS_whitedomains dstdomain "/etc/squid/acl/whitedomains.txt"
acl LS_blackdomains dstdomain "/etc/squid/acl/blackdomains.txt"
acl LS_malicius dstdomain "/etc/squid/acl/malicius.txt"
acl LS_ads-tracking dstdomain "/etc/squid/acl/ads-tracking.txt"

#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

delay_pools 1
delay_class 1 2
delay_parameters 1 103809024/103809024 15728640/15728640 # (98/98 megabytes in bytes and 15/15 megabytes in bytes)
delay_access 1 allow localnet

http_access deny LS_blackdomains
http_access allow LS_whitedomains
http_access deny LS_malicius
http_access deny LS_ads-tracking


# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed


http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128
http_port 3128

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320

# Other settings
quick_abort_min 0 KB
quick_abort_max 0 KB
read_timeout 5 minutes
request_timeout 3 minutes
shutdown_lifetime 0 seconds
ipcache_size 2048
fqdncache_size 4096
forwarded_for off
visible_hostname s-px02
httpd_suppress_version_string on

_______________________________________________
squid-users mailing list
[hidden email]
http://lists.squid-cache.org/listinfo/squid-users
Reply | Threaded
Open this post in threaded view
|

Re: Unable to limit bandwidth (squid 4.7.2 )

Alex Crow
You need to divide your 15mbits by 8. You want to limit to 15mbit not 15mbyte yes? Your limit is well over 100mbit/s

Sent from my Huawei phone


-------- Original message --------
From: Service MV <[hidden email]>
Date: Mon, 29 Jul 2019, 20:59
To: [hidden email]
Subject: [squid-users] Unable to limit bandwidth (squid 4.7.2 )
Hello everyone!
I have a 100/100 Mbit/s internet link and I am trying unsuccessfully to limit downloads to a maximum of 15Mb/s of any IP on my network. Some downloads consume the entire link.
I copy my settings to help me see where I'm going wrong. Thank you very much!
Gabriel

PS.: squid -v '--enable-delay-pools'

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN)
acl localnet src 10.10.8.0/22 # (My LAN)
#acl largefiledown src 10.10.8.0/22 # Limitar bajada y subida a 10Mbps
#acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN)
#acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN)
#acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines
#acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN)
#acl localnet src 192.168.0.0/16 # RFC 1918 local private network (LAN)
#acl localnet src fc00::/7       # RFC 4193 local private network range
#acl localnet src fe80::/10       # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT

acl LS_whitedomains dstdomain "/etc/squid/acl/whitedomains.txt"
acl LS_blackdomains dstdomain "/etc/squid/acl/blackdomains.txt"
acl LS_malicius dstdomain "/etc/squid/acl/malicius.txt"
acl LS_ads-tracking dstdomain "/etc/squid/acl/ads-tracking.txt"

#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

delay_pools 1
delay_class 1 2
delay_parameters 1 103809024/103809024 15728640/15728640 # (98/98 megabytes in bytes and 15/15 megabytes in bytes)
delay_access 1 allow localnet

http_access deny LS_blackdomains
http_access allow LS_whitedomains
http_access deny LS_malicius
http_access deny LS_ads-tracking


# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed


http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128
http_port 3128

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320

# Other settings
quick_abort_min 0 KB
quick_abort_max 0 KB
read_timeout 5 minutes
request_timeout 3 minutes
shutdown_lifetime 0 seconds
ipcache_size 2048
fqdncache_size 4096
forwarded_for off
visible_hostname s-px02
httpd_suppress_version_string on

--

Insert pointless drivel here.


_______________________________________________
squid-users mailing list
[hidden email]
http://lists.squid-cache.org/listinfo/squid-users
Reply | Threaded
Open this post in threaded view
|

Re: Unable to limit bandwidth (squid 4.7.2 )

neok
In reply to this post by neok
Thanks for patience.

I modify the line:
#                                 All net setting                                                                                  Individual client setting
#                                 first 15MB of file download full speed, then continue at 10MB/s            first 10MB of file download full speed, then continue at 7MB/s
delay_parameters 1      1310720/1966080                                                                             917504/1310720

In this way I can make the Delay Pool work.
But I'm still not sure if I'm using my symmetrical 100Mb/s bandwidth correctly.

Any comments on that?
           

El lun., 29 de jul. de 2019 a la(s) 16:58, Service MV ([hidden email]) escribió:
Hello everyone!
I have a 100/100 Mbit/s internet link and I am trying unsuccessfully to limit downloads to a maximum of 15Mb/s of any IP on my network. Some downloads consume the entire link.
I copy my settings to help me see where I'm going wrong. Thank you very much!
Gabriel

PS.: squid -v '--enable-delay-pools'

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN)
acl localnet src 10.10.8.0/22 # (My LAN)
#acl largefiledown src 10.10.8.0/22 # Limitar bajada y subida a 10Mbps
#acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN)
#acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN)
#acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines
#acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN)
#acl localnet src 192.168.0.0/16 # RFC 1918 local private network (LAN)
#acl localnet src fc00::/7       # RFC 4193 local private network range
#acl localnet src fe80::/10       # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT

acl LS_whitedomains dstdomain "/etc/squid/acl/whitedomains.txt"
acl LS_blackdomains dstdomain "/etc/squid/acl/blackdomains.txt"
acl LS_malicius dstdomain "/etc/squid/acl/malicius.txt"
acl LS_ads-tracking dstdomain "/etc/squid/acl/ads-tracking.txt"

#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

delay_pools 1
delay_class 1 2
delay_parameters 1 103809024/103809024 15728640/15728640 # (98/98 megabytes in bytes and 15/15 megabytes in bytes)
delay_access 1 allow localnet

http_access deny LS_blackdomains
http_access allow LS_whitedomains
http_access deny LS_malicius
http_access deny LS_ads-tracking


# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed


http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128
http_port 3128

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320

# Other settings
quick_abort_min 0 KB
quick_abort_max 0 KB
read_timeout 5 minutes
request_timeout 3 minutes
shutdown_lifetime 0 seconds
ipcache_size 2048
fqdncache_size 4096
forwarded_for off
visible_hostname s-px02
httpd_suppress_version_string on

_______________________________________________
squid-users mailing list
[hidden email]
http://lists.squid-cache.org/listinfo/squid-users
Reply | Threaded
Open this post in threaded view
|

Re: Unable to limit bandwidth (squid 4.7.2 )

neok
Just to explain clearly, my goal is that no user of my LAN can download more than 15 megabits/s, because some downloads consume me 100 magabits/s leaving the rest of the users offline.
Since squid calculates in bytes, it would be: 1966080 bytes the limit that I want to establish for any user of my LAN
Thank you very much for your help.

El mar., 30 de jul. de 2019 a la(s) 09:57, Service MV ([hidden email]) escribió:
Thanks for patience.

I modify the line:
#                                 All net setting                                                                                  Individual client setting
#                                 first 15MB of file download full speed, then continue at 10MB/s            first 10MB of file download full speed, then continue at 7MB/s
delay_parameters 1      1310720/1966080                                                                             917504/1310720

In this way I can make the Delay Pool work.
But I'm still not sure if I'm using my symmetrical 100Mb/s bandwidth correctly.

Any comments on that?
           

El lun., 29 de jul. de 2019 a la(s) 16:58, Service MV ([hidden email]) escribió:
Hello everyone!
I have a 100/100 Mbit/s internet link and I am trying unsuccessfully to limit downloads to a maximum of 15Mb/s of any IP on my network. Some downloads consume the entire link.
I copy my settings to help me see where I'm going wrong. Thank you very much!
Gabriel

PS.: squid -v '--enable-delay-pools'

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN)
acl localnet src 10.10.8.0/22 # (My LAN)
#acl largefiledown src 10.10.8.0/22 # Limitar bajada y subida a 10Mbps
#acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN)
#acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN)
#acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines
#acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN)
#acl localnet src 192.168.0.0/16 # RFC 1918 local private network (LAN)
#acl localnet src fc00::/7       # RFC 4193 local private network range
#acl localnet src fe80::/10       # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT

acl LS_whitedomains dstdomain "/etc/squid/acl/whitedomains.txt"
acl LS_blackdomains dstdomain "/etc/squid/acl/blackdomains.txt"
acl LS_malicius dstdomain "/etc/squid/acl/malicius.txt"
acl LS_ads-tracking dstdomain "/etc/squid/acl/ads-tracking.txt"

#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

delay_pools 1
delay_class 1 2
delay_parameters 1 103809024/103809024 15728640/15728640 # (98/98 megabytes in bytes and 15/15 megabytes in bytes)
delay_access 1 allow localnet

http_access deny LS_blackdomains
http_access allow LS_whitedomains
http_access deny LS_malicius
http_access deny LS_ads-tracking


# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed


http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128
http_port 3128

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320

# Other settings
quick_abort_min 0 KB
quick_abort_max 0 KB
read_timeout 5 minutes
request_timeout 3 minutes
shutdown_lifetime 0 seconds
ipcache_size 2048
fqdncache_size 4096
forwarded_for off
visible_hostname s-px02
httpd_suppress_version_string on

_______________________________________________
squid-users mailing list
[hidden email]
http://lists.squid-cache.org/listinfo/squid-users
Reply | Threaded
Open this post in threaded view
|

Re: Unable to limit bandwidth (squid 4.7.2 )

reinerotto
Delay pools are broken in squid 4.x for https. Work for http only.
"Known" bug, said to be fixed in squid 5.x only.
You might consider using squid 3.x instead.



--
Sent from: http://squid-web-proxy-cache.1019090.n4.nabble.com/Squid-Users-f1019091.html
_______________________________________________
squid-users mailing list
[hidden email]
http://lists.squid-cache.org/listinfo/squid-users
Reply | Threaded
Open this post in threaded view
|

Re: Unable to limit bandwidth (squid 4.7.2 )

Marcus Kool
In reply to this post by neok

On Linux you can use iptables to do qos and make sure that a single connection does not consume all bandwidth.

Marcus


On 30/07/2019 10:22, Service MV wrote:
Just to explain clearly, my goal is that no user of my LAN can download more than 15 megabits/s, because some downloads consume me 100 magabits/s leaving the rest of the users offline.
Since squid calculates in bytes, it would be: 1966080 bytes the limit that I want to establish for any user of my LAN
Thank you very much for your help.

El mar., 30 de jul. de 2019 a la(s) 09:57, Service MV ([hidden email]) escribió:
Thanks for patience.

I modify the line:
#                                 All net setting                                                                                  Individual client setting
#                                 first 15MB of file download full speed, then continue at 10MB/s            first 10MB of file download full speed, then continue at 7MB/s
delay_parameters 1      1310720/1966080                                                                             917504/1310720

In this way I can make the Delay Pool work.
But I'm still not sure if I'm using my symmetrical 100Mb/s bandwidth correctly.

Any comments on that?
           

El lun., 29 de jul. de 2019 a la(s) 16:58, Service MV ([hidden email]) escribió:
Hello everyone!
I have a 100/100 Mbit/s internet link and I am trying unsuccessfully to limit downloads to a maximum of 15Mb/s of any IP on my network. Some downloads consume the entire link.
I copy my settings to help me see where I'm going wrong. Thank you very much!
Gabriel

PS.: squid -v '--enable-delay-pools'

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN)
acl localnet src 10.10.8.0/22 # (My LAN)
#acl largefiledown src 10.10.8.0/22 # Limitar bajada y subida a 10Mbps
#acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN)
#acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN)
#acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines
#acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN)
#acl localnet src 192.168.0.0/16 # RFC 1918 local private network (LAN)
#acl localnet src fc00::/7       # RFC 4193 local private network range
#acl localnet src fe80::/10       # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT

acl LS_whitedomains dstdomain "/etc/squid/acl/whitedomains.txt"
acl LS_blackdomains dstdomain "/etc/squid/acl/blackdomains.txt"
acl LS_malicius dstdomain "/etc/squid/acl/malicius.txt"
acl LS_ads-tracking dstdomain "/etc/squid/acl/ads-tracking.txt"

#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

delay_pools 1
delay_class 1 2
delay_parameters 1 103809024/103809024 15728640/15728640 # (98/98 megabytes in bytes and 15/15 megabytes in bytes)
delay_access 1 allow localnet

http_access deny LS_blackdomains
http_access allow LS_whitedomains
http_access deny LS_malicius
http_access deny LS_ads-tracking


# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed


http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128
http_port 3128

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320

# Other settings
quick_abort_min 0 KB
quick_abort_max 0 KB
read_timeout 5 minutes
request_timeout 3 minutes
shutdown_lifetime 0 seconds
ipcache_size 2048
fqdncache_size 4096
forwarded_for off
visible_hostname s-px02
httpd_suppress_version_string on

_______________________________________________
squid-users mailing list
[hidden email]
http://lists.squid-cache.org/listinfo/squid-users

_______________________________________________
squid-users mailing list
[hidden email]
http://lists.squid-cache.org/listinfo/squid-users